107- Advanced techniques of position sizing

With some experience, a trader will understand that it’s possible to improve his/her trading results not only through market analysis but also with the help of other techniques. In particular, it’s possible to manage the size of an open position in order to limit risks and increase profit. Are you interested? Then let’s get into it.

Scaling in a trade

Scaling in implies increasing a trade that already shows a profit. It’s very useful in times when you think that a new trend may start but you aren’t really sure and want to reduce your risk exposure. This approach is also sometimes referred to as “pyramiding”.

Scaling in will reduce your risk only if you open a smaller trade than you usually do according to your money management rules. In other words, scaling in implies entering a trade in pieces. You will also need to choose in advance the levels at which you will add to your position.

Notice that you can only add to a position by opening a new order at the current market price. So, while we logically see it as “adding to a trade”, scaling in actually means that you make multiple positions in the same direction at different predetermined price levels (once the price arrives at these levels).

Example

Let’s imagine that you wanted to buy EUR/USD at 1.09 targeting 1.11 but didn’t feel sure about this trade. To reduce your risks, you decided to scale in: you broke your usual trade size (for example, 1 lot) in 4 parts (0.25 lots each) and defined levels at which you would open new buy trades (in this case, the trade was increased simply every 50 pips).

You can use different tools to determine the levels at which you will add to your trade: Fibonacci, pivot points, key previous highs, and lows, etc.

Scaling in protects you in case of unfortunate events. If you opened the entire 1-lot buy trade at 1.09 and then the market reversed down, your loss would have been 4 times bigger than the loss you would have if you opened a 0.25-lot trade. At the same time, if you didn’t open this trade at all and the price did really go up, you would have missed a chance to join a trend at the earliest stage.   

It would be wise to trail your stop loss after the price each time you add a new position so that you never risk more than you have decided to risk in one trade.

Notice that scaling in is not recommended for range-bound markets or periods when the price tends to make sharp movements back and forth. Scaling in is more suitable for trend and breakout trading.

All in all, scaling in helps to reduce the risks while increasing profit. This is a very good combo from the risk management point of view. Still, try not to get carried away: it’s not wise to scale in every profitable trade. Remember that the decision to scale in has to be made in advance before you open a trade. If you didn’t think that through or considered that it could be necessary at the time, then treat such trade like a usual one and don’t try to add to it.

Scaling out of a trade

Scaling out implies partial closing of a profitable trade. Why would anyone need to close a trade that’s showing a profit?

Imagine that you ride the trend for some time. The longer the trend unfolds, the greater the risk that it will end. At the same time, it’s in your interest to ride the trend as long as possible before the market reverses.

This is where scaling out will help: by closing a part of your position, you thus reduce your risks in case of a reversal. At the same point, you retain the opportunity to keep the trade open and if the trend continues you will gain more than you would have if you closed the trade earlier.

The good option is to combine scaling out of a trade with moving a Stop Loss order to breakeven point. It’s better to explain this on an example.

Example

You opened a buy trade at 1.1830 targeting a move up at least to the 1.1900 area with a Stop Loss at 1.1800. When the price reached 1.1900 it continued going up. That gave you an idea to scale out of this trade. You decided to close ¼ of the position and move your stop loss to the breakeven point (1.1830). This way if the market didn’t continue going up you would secure a small gain and lost nothing if the SL got hit.

However, it the price went up in line with your expectations, you would have a chance to take profit for another ¼ of the position at 1.1950 and then at 1.20 before the final part of your trade would be closed at 1.2050. Thus, you would have traded a big trend without risking anything after your SL was moved up to the no-loss level.  

Scaling out can be used as you trade trends or breakouts when the price is moving fast in one direction and you are not sure whether the volatility will keep propelling the market or make it reverse. There’s no point to scale out if you trade in a range.

In order to partially close a trade in MT4, go to the ‘Trade’ tab in the ‘Terminal’. Double click on the trade you wish to modify. An order window will appear. In ‘Volume’, type in the amount you wish to close or select from the drop-down menu. Click the yellow ‘Close #..’ button. Once done, you will receive a confirmation for the portion closed.

These were the safe and efficient methods of managing your position size. Next, we will explain the techniques that are not so safe and thus can lead to bad outcomes: forewarned is forearmed.

Averaging down and martingale

Averaging down means increasing a losing trade. Some traders do that in hope that the price will reverse and adding to the trade will allow them to enter the market at better levels. Beware that losses always make traders feel the strain of stress. That can cloud judgment and lead to all kinds of bad decisions. We recommend you to stay away from these tactics and increase only winning trades.

Martingale is a notorious type of cost-averaging strategies that came from the world of gambling. The core idea is very simple: you double your position size after every losing trade so that you recoup losses and more if a winning trade occurs.

The strategy is supposed to be suitable for systems where the chance of winning is equal to the chance of losing — for example, when you toss a coin. However, if you decide to use this strategy for currency trading, your risk exposure will actually be very high.

For instance, if you make wrong bets during a trend, the martingale approach can wipe up your entire deposit. Imagine that you have $100. If you lose $5 in your first trade, it will take 4 losses in a row (-$5, -$10, -$20, -$40) for you to lose your deposit. As you will have only $25 left after such trades, you won’t be able to continue martingale and attempt to finally make the winning trade that will make up for the lost money. Add here the fact that if you use big leverage, even small price movements against you will let you bear big losses. As a result, martingale can be used only by very experienced and confident traders who have a large amount of capital.

Read More

106- How to use Ichimoku Kinko Hyo?

Ichimoku Kinko Hyo (IKH) or simply Ichimoku is a very useful and informative technical indicator. It’s name is translated from Japanese as a “glance at a chart in equilibrium”. The idea is that you will learn everything you need to know about the state of the market with just one sight on a chart containing this indicator.

The Ichimoku indicator performs several important tasks. It:

• marks the direction of the dominant trend;
• shows momentum and strength of a trend;
• provides reliable support and resistance levels;
• gives trade signals.

At first, this indicator may look intimidating but when you know it you will find it rather simple and invaluable in market analysis.

In the following tutorial, we will tell you about the elements of Ichimoku and the signals they produce. We will explain how to analyze the market with this technical tool.

The elements of Ichimoku

 The indicator is based on moving averages which have some modifications. Its lines have traditional Japanese names as well as conventional modern ones.

Have a look at the example of the Ichimoku indicator on the chart. We can distinguish the 3 layers — the past, the present, and the future.

'Present' of Ichimoku indicator

Let’s start with the so-called “present”. It’s characterized by 2 lines — Kijun and Tenkan. Of these two, Kijun (the base line) is a moving average with a bigger period. As a result, it measures medium-term momentum and has more weight than Tenkan. The price crosses Tenkan more often than Kijun, and if the price does cross Kijun, it signals changes in the market.  

'Future' 

The “future” is represented by the Ichimoku Cloud. The cloud is formed by the 2 moving averages which are shifted forward. If the moving average with the bigger period (Senkou Span B) is below the moving average with a smaller period (Senkou Span A), the Cloud is considered bullish. Its color is usually light. If Senkou Span B is above Senkou Span A, the Cloud is considered bearish. Such Cloud often has a darker color. Bullish Cloud means that buyers dominate the market, while bearish Cloud shows that sellers are in control. You can see that the Cloud changes color from time to time reflecting the shifts of power from bulls to bears and back. The width of the Cloud matters: the wider the bearish Cloud, the stronger are the sellers. To understand the current power balance of the market, look at the part of the Cloud that is “in the future”, i.e. to the right of the current price. As for the part of Cloud, which is aligned with the current prices, it acts as support and resistance for the price.    

'Past'

In the “past”, there’s a single line called Chinkou Span. Unlike the other Ichimoku lines, it’s not a moving average, but simply a price chart moved a number of periods back so that it lags behind the market. The way this line interacts with the price chart itself offers hints for traders.     

Why are some elements of the indicator switched forward and some are placed backward? Firstly, it would be very difficult to read the chart if all the 5 lines were in the same area. In addition, this way the elements of Ichimoku indicator produce trade signals. The following tutorial will show you how to interpret these signals.

How to implement Ichimoku

To apply Ichimoku to a chart in Metatrader, click “Insert”, choose “Indicators”, and pick “Custom”, then “Ichimoku”. In the settings, you can choose values for Tenkan, Kijun and Senkou Span B. You can also adjust the colors the indicator’s lines according to your preferences.

The default settings 9-26-52 are the original parameters proposed by the indicator’s developer. They are popular among traders and can be used on any timeframe. At the same time, you are also free to adjust the default settings. The key thing is to choose the increasing values so that the figure for Tenkan-sen is the smallest and the value for Senkou Span B is the biggest.

Trading with Ichimoku

The position of Ichimoku lines can give traders a clear view of the existing trends. When the market is sideways, the indicator lines are horizontal so that the price is fluctuating around them. The Cloud is thin and changes its color often.

If the price is above the Cloud, Tenkan and Kijun and the bullish Cloud is solid, it’s an uptrend. Chinkou Span will be above the price in this case. 

If the price is below the Cloud, Tenkan and Kijun and the bearish Cloud is solid, it’s a downtrend. Chinkou Span will be below the price in this case. 

The Ichimoku lines produce trade signals by crossing each other and the price, that why there are many different signals in the table below. Notice that when a new trend starts, signals from different elements of the indicator tend to appear around the same time and point in one direction.

 

Let’s review an example of how Ichimoku provides trade signals.

1 - The price went below Kijun-sen. It’s a first bearish signal.

2 - Tenkan-sen fell below Kijin-sen. 

3 - Chinkou Span crossed the price chart to the downside.

4 - The price broke below the Ichimoku Cloud.

5 - The Cloud switched from bullish to bearish.

The signals 2-4 appeared around the same time and signaled the start of a bearish trend. They point at the opportunity to open a sell trade. The lines of the indicator then acted as resistance for the price.

6 - Chinkou Span broke back above the price chart. It’s possible to take profit from a short position. 

7 - The price went above Kijun-sen.

8 - Tenkan-sen went above Kijun-sen.

9 - The thick bearish Ichimoku Cloud acted as resistance for the price but it finally managed to break in.

10 - The Cloud switched from bearish to bullish. The price went above the Cloud. There are indications of an emerging uptrend, although, given the fact that Chinkou Span corrected to the price chart, there may also be a sideways trend for some time. 

 Conclusion

 The Ichimoku indicator represents a complete trading system. It’s possible to use just this indicator for trading. You can use it to identify trends, check for support and resistance levels as well as get entry signals. You can customize the indicator’s settings and use it together with other tools of technical analysis.

Read More

105- How to trade gaps?

A gap is an empty space within a price chart between the two neighboring candlesticks.

Gaps occur when the following candlestick opens at a distance from the previous candlestick closing price. This may happen if the market’s view of the price rapidly changes and there’s a sudden influx of buy/sell orders. At some point, the price which was at the closing of a candlestick is no more interesting for traders and the new price of the following candlestick better represents the value of an asset (a currency pair).

In Japanese technical analysis gaps are referred to as “windows”.

Here are the main types of gaps:

1. Breakaway gaps

Breakaway gaps occur at the end of a price pattern and signal the beginning of a new trend. Such gaps appear when the price is testing a level on the chart – support, resistance, trend line, trend channel etc. The price suddenly gaps through the tested level and then starts a new trend in the direction of the breakout. It’s easy to spot breakaway gaps on the chart. Their other advantage is that by spotting ing such gap a trader can join a new trend at the earliest stage.

2. Continuation gaps

Continuation gaps happen in the middle of a price pattern and signal a rush of buyers or sellers who think that the price will continue going in the same direction. In other words, if you see a bullish gap during an uptrend, then you have a bullish continuation gap in the price chart. If a trend is bearish and a bearish gap is formed, it’s bearish continuation gap.

3. Exhaustion gaps

Exhaustion gaps take place near the end of a price pattern and signal a final attempt to hit new highs or lows. During these time, the last portion of market players joins the trend and there will be no one to support this trend after that. As a result, an exhaustion gap is followed by a reversal in price action. It’s possible to take an exhaustion gap for a continuation one. To make the right distinction between these two types of gaps, have a look at the size of candlesticks: if a currency pair is very volatile, candlesticks on the chart are big and the price made several jerking moves, it might be an exhaustion gap.

Besides the types of gaps mentioned above, it’s also possible to see common gaps. By this term, we mean gaps that can’t be placed in a price pattern and simply represent an area where the price has gapped.

Weekend gaps

A specific type of gaps takes place after weekends. As you know, the Forex market is not very active on Saturday and Sunday, so the main currency trading ends on Friday and starts on Sunday night with the beginning of the Asia-Pacific trading session. Yet, important events may happen during the time the market is standing still. The news may include a great number of things from political announcements and interviews to natural disasters. As a result, a great number of trading orders is accumulated before the opening of the market. These orders are not met with counter orders. As there’s no demand/supply, market players have to open positions for the prices that are higher/lower than the prices seen on Friday evening. You can easily spot weekly gaps on M1-H4 timeframes. Sometimes, when there really are some big news during the weekend, an opening gap can be very wide.

Read More

104- Elliott Wave analysis : Fibonacci Ratios and Impulse Waves

Retracements

Usually, a correction tests one of the Fibonacci levels of the previous wave. The most common levels are 0.236, 0.382, 0.5, 0.618, 0.786. The last one is √0.618, which quite often turns out to be a useful level. As we already know for the previous article, there's such a thing like alternation, which means there's a special relationship between waves two and four of an impulse. One of these corrections could be sharp, and another one expresses itself in a sideways shape. At this point, we could use Fibonacci levels as a helpful tool, so let's examine some examples.

The chart below represents a classic relation between the second and fourth waves. Wave ((ii)) reached the 0.618 level while wave ((iv)) achieved just the 0.382 level of the wave ((iii)). In most cases, the second wave is deeper in relation to the preceding wave than the fourth wave. Thus, in most cases, we should watch the 0.618 level as the main target for the second wave, but there're always some exceptions and these guidelines are not written in stone.

As mention above, the 0.786 level could also be a target. The next chart shows the case exactly. Wave ((ii)) and then wave (ii) finished on the 0.786 levels and both of them were a departure point for a bearish wave. At the same time, both waves (iv) and ((iv)) retraced only 0.236 of the previously formed third wave. So, that's another example of how alternation works.

Which level we should pick as a target

Even though the 0.618 level is the primary target for wave two, we should watch a structure of the correction as well. So, we should only consider wave two as ended when we have two factors on board such a finished correction structure and a pullback from one of the Fibonacci levels. This approach reduces the risks of premature opening trades and losses as consequences of that.

Let’s have a look at wave ((iv)), which took the form of a triangle. The ending of this pattern tested the 0.236 level, which kicked off a downward five-wave rally. This shows that we should match the ending of a triangle and the Fibonacci levels, but not the internal parts of the pattern.

If a rally is that strong, waves two could be weak. The next chart represents this case. Both waves (ii) and ii reached just the 0.382 levels and the market continued rising. Again, it's all about the form. If we have a three-waves price movement, which we could consider as a complete correction, and then a pullback from the 0.382 level happens, then it could be enough for wave two. On the other hand, we should remember about the possibility to have a more prolonged correction as a double zigzag. Thus, whatever pattern or pullback you see, there's always no reason to forget about the risk management.

Sometimes, wave two balances between the 0.5 and 0.618 levels. If there is a couple of pullbacks from these levels, that brings more evidence that's wave two is about to end. Also, during extension, it's common to have relatively small wave two. As you can see on the chart below, wave (ii) ended on the 0.236 level as well as wave (iv). That's more common on the stock market, where we could have rallies like a rocket quite often, so in moments like that, the price simply has no time for deeper corrections.

Fibonacci Extensions of Motive Waves (Multiples)

We can use the Fibonacci Extension tool to predict the length of waves three and five. The most common target to the third wave is the 1.618 multiple of the first wave. The fifth wave tends to reach the 0.618 multiple of the third wave. Such classic relations you can see on the next chart.

Sometimes, an extension in the third wave turns out to be so long and in this case, we should watch 2.618, 2 and 3.618 levels as possible targets. As you can see on the chart below, wave 3 finished between the 2.618 and 3.618 levels. Again, it all depends on the wave structure. Thus, if the third wave reached the 1.618 level, but there's no finished five-wave price movement, then it'll be logical to watch the next levels as a target.

From time to time, 1 and 2 multiples are also could be useful. Wave (iii) of ((a)) on the next chart finished at 1 level, while wave (iii) of ((c)) achieved the 2 multiple levels. In both cases, the inner structure of these third waves was helpful to recognize a possible ending of these impulses.

Also, let's have a look at waves (i) and (v) of ((c)), which are equal. Usually, this happens if the third wave is more than 1.618 multiple, but again we should rely on the wave's structure first.

The Bottom Line

 The Fibonacci relations are the core part of the Elliott Wave Principle. The structure of a developing wave could point out the appropriate Fibo level as a target, so we should always try to match the ongoing wave and the nearest level to achieve the best results.

Read More

103- Elliott Wave analysis : Guidelines of Alternation

There’re rules and guidelines in the Elliott Wave Theory. You must follow all the rules we went through in the previous articles, but the guidelines are not written in stone. In other words, guidelines not always appear but they are in a sufficient number of cases, so we shouldn’t ignore them.

What is Alternation?

Simply put, an alternation is about expecting some difference of similar waves’ expression inside a pattern by depth, complexity, and duration. Alternation happens inside impulses and corrections. Let’s see some examples.

Alternation in Impulses

Usually, there’s a relation between waves two and four in an impulse. There’s an upward impulse on the next chart. Wave (ii) of this impulse is sharp, but wave (iv) moves sideways. So, that’s how alternation works in impulses, which have two corrections inside – waves two and four. If alternation occurs, then if one correction has direction, the other one hasn’t got one.

Also, the wave (ii) is pretty easy here, but the wave (iv) has more waves inside, so there’s another alternation by complexity.

The chart below shows two alternations. Inside the wave (iii) we have sharp wave ii, so, as you can guess, wave (iv) is sideways. Another example is in wave iii, its wave two moves sideways and the wave four is sharp, so the order has changed. That’s also a kind of alternation when you face such a successive changing in a shape in waves two and four.

Alternation in Triangles

Waves inside corrections subdivide into Simple, Complex and Most Complex. Inside triangles, one of the waves tends to be the most complex. As you can see on the chart below, wave B has the most complex structure while other waves are Simple or Complex.

Alternation in Zigzags

Sometimes one of zigzag’s waves has more complex structure than others. The next chart represents a case with a complex wave ((c)) in a relation to waves ((a)) and ((b)). However, if you face with a simple wave A and a complex wave B, then likely a wave C will be a simple one as well as the wave A.

Alternation in Double Zigzags

Waves of double zigzag could also express some difference from each other. Let’s have a look at the chart below. The wave (w) is simple, the wave (x) is complex and the wave (y) is the most complex. Thus, if we have quite easy waves W and X of a double zigzag, we shouldn’t rule out a possibility of complexness of the wave Y.

Alternation in Flats

The consistency ‘Simple-Complex-Most Complex’ could also apply to flats. The next chart shows a case with the most complex wave C. At the same time, wave B could be the most complex while a massive rally in wave C expresses itself as a simple wave. 

The Bottom Line

Alternation is one of the most useful guidelines, which helps us to understand which style of a wave we could face with in the next markets’ stages. It’s not a direct rule, but a very powerful additional tool to improve wave counts.

Read More

102- Elliott Wave analysis : What is a triangle?

Triangles are a correction five-wave pattern (marked as A-B-C-D-E), which is divided into five types. This pattern is formed in a position prior to the final wave in an impulse or a correction. For example, a triangle could be formed in a wave four in an impulse or wave B in a zigzag.

Also, this pattern occurs in final wave X in a double/triple zigzag or three patterns.

• Wave two of an impulse can’t be a triangle.
• Waves A, B and C are usually zigzags, double zigzags, triple zigzags (that’s rare), double and triple threes.
• Waves D and E could be triangles themselves. 

Triangle’s classification

On the next picture, you can find all types of triangles (Horizontal, Barrier, Expanding, Running and Skewed). Let’s examine them one by one.

Horizontal Triangle

This pattern is also known as a contracting triangle. As you might guess from the name of this pattern, its lines are aimed towards each other. Each wave of this triangle is shorter than the previous one, which means wave (b) doesn’t break the beginning point of the wave (a), wave (c) doesn’t break the starting point of the wave (b) etc. On the next chart, you can see a triangle in the position of the fourth wave, so a five-wave decline happened right after the pattern.

Barrier Triangle

The only difference from the contracting triangle is that the line B-D or A-C-E is horizontal. The other one goes towards a horizontal line, so a Barrier Triangle is a variation of the contracting pattern. You can find an example of this pattern on the chart below.

Expanding Triangle

This triangle is the trickiest one. It’s simply impossible to predict this pattern from the beginning, so we could count it only when the wave E finishes. Both lines of the pattern are directed in the opposite direction.  

Running Triangle

Sometimes, the wave B of a triangle could be longer than wave A, but all other waves are smaller from the one before. The next chart shows an example of a Running Triangle in the position of the fourth wave. As you can see, wave ((e)) of the pattern doesn’t reach the upper side of the triangle. This happens quite often, so we should always consider the structure of the wave E to predict its ending.

Skewed Triangle

If a very strong trend takes place, we could face a Skewed Triangle, its wave D is longer than wave B. So. It’s the only type of triangle, which has a direction towards the main trend. This pattern is rare and we should mark it as the last possible scenario. The following chart represents a Skewed Triangle, which pushed the price higher into the fifth wave.

Other examples: Ending of wave E

It’s possible for the wave E to break the A-C line of a triangle. If this happens, it’s important to wait for the price to come back into a range of the pattern. As you can see on the chart below, the pair tested the triangle’s lower side, but a subsequent pullback from it led to the beginning of the fifth wave.

Massive fifth wave

From time to time, the market could move pretty fast right after a triangle. The next chart shows that case. The ending of the wave ((iv)) as a triangle turned out to a huge rally in wave ((v)). As far as we know that a triangle forms prior to the final wave in an impulse, we should expect a correction after the rally. Note that there’s also a small triangle in wave (iv) of ((iii)).

Two triangles

If an extension in the third wave takes place, it’s possible to wave two triangles in a row, which could be formed in a position of the fourth waves from different degrees. You can find an example of such a case on the last chart. Wave 4 of (3) is formed as a triangle, but right after the wave 5 of (3) the market developed another triangle in wave (4).

The Bottom Line

There’re a few deferent shapes of triangles. This pattern is the last correction in impulsive or corrective structures. We could count a triangle only when its structure is fully completed.

Read More

101- Elliott Wave analysis : Double Three and Triple Three patterns

Double and Triple Threes are the trickiest wave patterns, which consist of zigzags, flats, triangles, double and triple zigzags. There’s no any rule related to order of these correction patterns, except a position of a triangle in these structures.

What’s a Double Three pattern?

Simply put, that’s a combination of three correction patterns. Let’s have a look at an example below:

The main rules for Double Threes trading

• Double Three consists of three waves, which are marked as W-X-Y
• Wave W could be any correction pattern, except triangles
• Waves X and Y could take the form of any correction pattern
• Double Three is formed horizontally or with a low dip against the main trend
• In most cases, Double Threes are not deep corrections.

We could count a correction as a Double Three only when the structure is almost over. In other words, it’s not possible to predict this pattern from the very beginning of a correction. So, if a structure, which fits the Double Three’s rules arrives, only then we could decide to mark this pattern.

It’s important to understand that when we have just finished wave X, there’re always a few ways to finish the correction. We could have an impulse so that the correction could take the form of a flat. If a long zigzag is formed instead, then the correction turns out to be a double zigzag. Finally, if we have just a small zigzag, as shown in the chart above, then we could consider the possibility to have a double three pattern.

Real Examples

A Double Three pattern from zigzags is shown on the chart below. As you can see, waves (w), (x) and (y) are zigzags, so it’s the easiest shape of this pattern. Note that wave (y) is much the same as wave (w), so the correction moves almost horizontally, which is the key point in the rules for Double Threes.

Another example is on the next chart. There’s a Double Three pattern with huge wave (x). Also, we could perfectly see the difference between a Double Three and a Double Zigzag. Wave (x) here is a Double Zigzag, so this wave has an upward direction. Wave ((iv)) has no direction, so we could mark it like a Double Three pattern as (w)-(x)-(y).

Let’s have a look at the chart below. There are two Double Threes in waves B and ((x)). Wave (y) of ((x)) is a flat pattern, which the trickiest part of the structure. Meanwhile, both Double Threes patterns have a horizontal direction (remember, that’s the guiding criterion of any Double Three).

Sometimes wave X could be far longer than the wave W. As you can see on the next chart, wave (x) ended below the starting point of the wave (w), but then an upward zigzag in wave (y) has arrived. Moreover, wave (a) of (x) is a leading diagonal that makes this count even more complicated. So, in the real-time wave counting, we could make a decision on a possible ending of the wave ((b)) as a Double Zigzag only after waves (i) and (ii) of ((c)).

What’s a Triple Three pattern?

This pattern is longer than Double Three, so it subdivides into five waves, which all move sideways against the main trend.

The main rules for Double Threes trading

• Triple Three consists of five waves, which label as W-X-Y-X-Z
• Waves W, X, and Y could be any correction pattern, except triangles
• Second wave X and Z could take the form of any correction pattern
• Triple Three is formed horizontally or with a low dip against the main trend
• In most cases, Triple Threes are not deep corrections.

Triple Three is quite a rare pattern, so you should try to avoid counting it in real time. You can see an example of this pattern on the next chart, where wave ((b)) is a Triple Three. We could consider this structure as a Triple Zigzag only after wave (z). Actually, it works for all other correction patterns, so we should always wait until the full structure of correction arrives to make a decision on one or another wave count, which fits the rules the most.

Read More

100- Elliott Wave analysis : Double Zigzag

As you can guess from the title, this pattern consists of two zigzags and correction between them. This is the first complex correction pattern we’re going to examine.

The main rules for Double Zigzags trading

• Double Zigzags subdivide into three waves and labels as W, X, and Y.
• Usually waves W and Y are zigzags.
• Wave X could form any correction pattern.
• Wave X is always smaller than wave W.
• Wave Y is always longer than wave X.
• In most cases, Double Zigzags are a deep correction in relation to the previous price movement.

It’s not easy to recognize a double zigzag in real time. Usually, this pattern forms when the first zigzag is far smaller from the expecting correction, so after a break, the second zigzag arrives. In other words, if the first zigzag isn’t enough to be a correction itself, the second zigzag takes place.

Duration of wave X

Usually, as shown in the chart below, wave X is longer than corrections inside waves W and Y. If a pattern forms in this shape, it’s pretty easy to label it. Remember, we can say that one or another pattern forms only when the whole structure ends. Until then, we should be careful.

However, sometimes wave X of a double zigzag could be relatively small. In this case, we could count this part of a chart as a single zigzag with extended waves A or C (depending on waves relations because the third wave can’t be the shortest).

Also, if we have a possible count with the longest wave C (this example is on the right on the chart below), we should also consider an option with a developing impulse (in this case wave C turns out to be the third wave). So, it’s safer to have a double zigzag with long wave X (see the chart above), while a wave count with small wave X could also have some alternatives.

 

Real examples

Let’s have a look at the chart below. There’s a downward double zigzag with a triangle in wave ((x)) (we’re going to examine this pattern in the next articles). Waves (a) and (c) of waves ((w)) and ((y)) are impulses (sometimes we could face leading or ending diagonals as well). An impulse in wave (i) confirms the ending of the double zigzag.

 

The next chart shows a double zigzag with an extended wave ((X)), so it’s easy to count two zigzags in the motive waves ((W)) and ((Y)), which both have longer waves (A). Also, note that an ending diagonal in wave (C) of ((Y)) highlights the ending of the whole pattern.

Two more examples of a double zigzag are shown below. There’s a downward pattern with impulses in all motive waves. Also, there’s another double zigzag in wave (x) with a pretty rare combination of diagonals. An ending diagonal in wave ((C)) of (w) is the final wave of the first zigzag and the second one started by wave ((A)) of (y) as a leading diagonal.

Triple zigzag: display and main trading rules

A pattern with three zigzags in a row calls a triple zigzag. Firstly, they're the main rules for this pattern:

• Double Zigzags subdivide into five waves and labels as W, X, Y, XX, and Z.
• Usually waves W, Y, and Z are zigzags.
• Wave X could form any correction pattern, except triangles.
• Wave XX could form any correction pattern.
• Wave X is always smaller than wave W.
• Wave Y is always longer than wave X.
• Wave XX is always smaller than wave Y.
• Wave Z is always longer than wave XX.
• In most cases, Triple Zigzags are a deep correction in relation to the previous price movement.

As you can see, the main difference from Double Zigzags is that Triple Zigzags consist of five waves as well as impulses and diagonal. However, Triple Zigzags are corrective waves while impulses and diagonal are motive ones.

To be honest, this pattern is rare. Moreover, it’s pretty rare. In this case, we should avoid using this pattern in the real-time wave counting because in most cases we’ll be wrong sooner or later. If you think there’s a Triple Zigzag, the first thing you should do is to check if there’s another wave count possible. More often, a simpler wave count is available.

Real example

It’s pretty hard to find an example, but there’s one on the next chart. All motive waves here are zigzags. The first wave X is a zigzag and the second one is a double zigzag. Keep in mind, that the second corrective wave of a triple zigzag could be marked as X or XX.

Read More

99- Elliott Wave analysis : Zigzag and Flat patterns

Unlike motive waves, corrections are more complicated and tricky structures. There're simple and complex correction patterns:

• Zigzag
• Flat
• Double / Triple Zigzag
• Double / Triple Threes
• Triangles

The first two (a zigzag and a flat) are simple patterns, which are bricks of complex corrections. In this article, we're going to examine zigzag and flat patterns.

What's a zigzag pattern?

Like most correction patterns, zigzag subdivides into three waves, which are marked as A-B-C.

The main rules for zigzags:

• Zigzags subdivides into three waves.
• Wave A is always an impulse or a leading diagonal.
• Wave B could take the form of any correction pattern.
• Wave C is always an impulse or an ending diagonal.
• Wave B is shorter than wave A.
• Wave C is longer than wave B.
• Waves A and C are motive, wave B is corrective.

A flat pattern

Another simple correction is a flat pattern, it also subdivides into three waves and is marked as A-B-C, but the structure is different.

The main rules for flats:

• Flats consist of three waves.
• Wave A could be any correction pattern except triangles.
• Wave B could be any correction pattern, but in most cases, it's a zigzag.
• Wave C is always an impulse or an ending diagonal.
• Wave B has a length of more than 90% of wave A.
• Wave C is usually equal or even longer than wave B.
• Waves A and C are motive, wave B is corrective.

As you can see from the chart below, there’re three types of the flat pattern depending on the length of waves B and C.

Regular Flat: Wave B is almost equal to wave A (at least 90%), while wave C tends to be equal to wave B.

Expanded Flat: Wave B is longer than wave A and wave C is longer than wave B.

Running Flat: Wave B is longer than wave A, but wave C is shorter than wave B.

Real examples

The chart shows a simple zigzag in wave (ii) with impulses in waves a and c. This is the most common structure of zigzags. Also, pay attention to a leading diagonal, which has formed after wave (ii). The pattern confirmed the ending of the zigzag.

 

Elliott wave patterns form on all markets, including cryptocurrencies. There’s Ethereum chart below, where we could find three zigzags. The biggest one is wave (ii). As you can see, the wave (a) of (ii) is a leading diagonal pattern. Wave ii (on the right) is a zigzag with the same structure (wave ((A)) is a leading diagonal). Another zigzag is wave b (in the middle of the chart), its wave ((A)) is far longer than wave ((C)). Sometimes such a disproportion happens, so now you know what you can face with.

It’s also possible to have a zigzag with an ending diagonal in wave C, you can see this case on the next chart. Wave ((a)) here is an impulse, but after wave ((b)) there’s an ending diagonal in wave ((c)). As you already know, an ending diagonal could form in a position of the last wave of a motive wave (wave five of an impulse or wave C of a zigzag).

The chart below represents such a rare case when motive waves of a zigzag are formed like a leading and ending diagonals. Contracting diagonals are more common, but we also could face a structure with expanding ones.

Sometimes wave C of a zigzag could be fast-moving as you can see on the next chart. There’s a plain and clear structure of the wave (a), but wave (c) consists of only three bars. This usually happens when news or political events influence the price movement.

There’s a flat pattern in wave b on the chart below. This is a regular flat because wave ((B)) is about 0.9 of wave’s ((A)) length. However, the wave ((C)) is pretty fast. There’s one more interesting thing. There’re two zigzags in waves ((A)) and ((B)). The first pattern has wave (A) as an expanding leading diagonal, which is quite rare. The next zigzag has a contracting leading diagonal in wave (A) of ((B)), which is more common.

Wave C of a flat pattern could be also an ending diagonal as shown on the next chart. Wave (b) is shorter than wave (a), so it’s a regular flat. However, an ending diagonal in wave (c) finishes below the high of wave (a) that is how running flats ends. As you can see, there’re some variations in each type of flat patterns in the real market.

The last chart shows a perfect example of an expanded flat pattern. Wave ((B)) is far longer than wave ((A)) and the ending of wave ((C)) breaks the low of wave ((B)). The subsequent bullish impulse in wave ((1)) confirms that a flat pattern is over.

Read More